Know and Debug System, Application and Hardware Errors via Error Codes

Constant/value Description
ERROR_STACK_OVERFLOW
1001 (0x3E9)
Recursion too deep; the stack overflowed.
ERROR_INVALID_MESSAGE
1002 (0x3EA)
The window cannot act on the sent message.
ERROR_CAN_NOT_COMPLETE
1003 (0x3EB)
Cannot complete this function.
ERROR_INVALID_FLAGS
1004 (0x3EC)
Invalid flags.
ERROR_UNRECOGNIZED_VOLUME
1005 (0x3ED)
The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupted.
ERROR_FILE_INVALID
1006 (0x3EE)
The volume for a file has been externally altered so that the opened file is no longer valid.
ERROR_FULLSCREEN_MODE
1007 (0x3EF)
The requested operation cannot be performed in full-screen mode.
ERROR_NO_TOKEN
1008 (0x3F0)
An attempt was made to reference a token that does not exist.
ERROR_BADDB
1009 (0x3F1)
The configuration registry database is corrupt.
ERROR_BADKEY
1010 (0x3F2)
The configuration registry key is invalid.
ERROR_CANTOPEN
1011 (0x3F3)
The configuration registry key could not be opened.
ERROR_CANTREAD
1012 (0x3F4)
The configuration registry key could not be read.
ERROR_CANTWRITE
1013 (0x3F5)
The configuration registry key could not be written.
ERROR_REGISTRY_RECOVERED
1014 (0x3F6)
One of the files in the registry database had to be recovered by use of a log or alternate copy. The recovery was successful.
ERROR_REGISTRY_CORRUPT
1015 (0x3F7)
The registry is corrupted. The structure of one of the files containing registry data is corrupted, or the system’s memory image of the file is corrupted, or the file could not be recovered because the alternate copy or log was absent or corrupted.
ERROR_REGISTRY_IO_FAILED
1016 (0x3F8)
An I/O operation initiated by the registry failed unrecoverably. The registry could not read in, or write out, or flush, one of the files that contain the system’s image of the registry.
ERROR_NOT_REGISTRY_FILE
1017 (0x3F9)
The system has attempted to load or restore a file into the registry, but the specified file is not in a registry file format.
ERROR_KEY_DELETED
1018 (0x3FA)
Illegal operation attempted on a registry key that has been marked for deletion.
ERROR_NO_LOG_SPACE
1019 (0x3FB)
System could not allocate the required space in a registry log.
ERROR_KEY_HAS_CHILDREN
1020 (0x3FC)
Cannot create a symbolic link in a registry key that already has subkeys or values.
ERROR_CHILD_MUST_BE_VOLATILE
1021 (0x3FD)
Cannot create a stable subkey under a volatile parent key.
ERROR_NOTIFY_ENUM_DIR
1022 (0x3FE)
A notify change request is being completed and the information is not being returned in the caller’s buffer. The caller now needs to enumerate the files to find the changes.
ERROR_DEPENDENT_SERVICES_RUNNING
1051 (0x41B)
A stop control has been sent to a service that other running services are dependent on.
ERROR_INVALID_SERVICE_CONTROL
1052 (0x41C)
The requested control is not valid for this service.
ERROR_SERVICE_REQUEST_TIMEOUT
1053 (0x41D)
The service did not respond to the start or control request in a timely fashion.
ERROR_SERVICE_NO_THREAD
1054 (0x41E)
A thread could not be created for the service.
ERROR_SERVICE_DATABASE_LOCKED
1055 (0x41F)
The service database is locked.
ERROR_SERVICE_ALREADY_RUNNING
1056 (0×420)
An instance of the service is already running.
ERROR_INVALID_SERVICE_ACCOUNT
1057 (0×421)
The account name is invalid or does not exist, or the password is invalid for the account name specified.
ERROR_SERVICE_DISABLED
1058 (0×422)
The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.
ERROR_CIRCULAR_DEPENDENCY
1059 (0×423)
Circular service dependency was specified.
ERROR_SERVICE_DOES_NOT_EXIST
1060 (0×424)
The specified service does not exist as an installed service.
ERROR_SERVICE_CANNOT_ACCEPT_CTRL
1061 (0×425)
The service cannot accept control messages at this time.
ERROR_SERVICE_NOT_ACTIVE
1062 (0×426)
The service has not been started.
ERROR_FAILED_SERVICE_CONTROLLER_CONNECT
1063 (0×427)
The service process could not connect to the service controller.
ERROR_EXCEPTION_IN_SERVICE
1064 (0×428)
An exception occurred in the service when handling the control request.
ERROR_DATABASE_DOES_NOT_EXIST
1065 (0×429)
The database specified does not exist.
ERROR_SERVICE_SPECIFIC_ERROR
1066 (0x42A)
The service has returned a service-specific error code.
ERROR_PROCESS_ABORTED
1067 (0x42B)
The process terminated unexpectedly.
ERROR_SERVICE_DEPENDENCY_FAIL
1068 (0x42C)
The dependency service or group failed to start.
ERROR_SERVICE_LOGON_FAILED
1069 (0x42D)
The service did not start due to a logon failure.
ERROR_SERVICE_START_HANG
1070 (0x42E)
After starting, the service hung in a start-pending state.
ERROR_INVALID_SERVICE_LOCK
1071 (0x42F)
The specified service database lock is invalid.
ERROR_SERVICE_MARKED_FOR_DELETE
1072 (0×430)
The specified service has been marked for deletion.
ERROR_SERVICE_EXISTS
1073 (0×431)
The specified service already exists.
ERROR_ALREADY_RUNNING_LKG
1074 (0×432)
The system is currently running with the last-known-good configuration.
ERROR_SERVICE_DEPENDENCY_DELETED
1075 (0×433)
The dependency service does not exist or has been marked for deletion.
ERROR_BOOT_ALREADY_ACCEPTED
1076 (0×434)
The current boot has already been accepted for use as the last-known-good control set.
ERROR_SERVICE_NEVER_STARTED
1077 (0×435)
No attempts to start the service have been made since the last boot.
ERROR_DUPLICATE_SERVICE_NAME
1078 (0×436)
The name is already in use as either a service name or a service display name.
ERROR_DIFFERENT_SERVICE_ACCOUNT
1079 (0×437)
The account specified for this service is different from the account specified for other services running in the same process.
ERROR_CANNOT_DETECT_DRIVER_FAILURE
1080 (0×438)
Failure actions can only be set for Win32 services, not for drivers.
ERROR_CANNOT_DETECT_PROCESS_ABORT
1081 (0×439)
This service runs in the same process as the service control manager. Therefore, the service control manager cannot take action if this service’s process terminates unexpectedly.
ERROR_NO_RECOVERY_PROGRAM
1082 (0x43A)
No recovery program has been configured for this service.
ERROR_SERVICE_NOT_IN_EXE
1083 (0x43B)
The executable program that this service is configured to run in does not implement the service.
ERROR_NOT_SAFEBOOT_SERVICE
1084 (0x43C)
This service cannot be started in Safe Mode
ERROR_END_OF_MEDIA
1100 (0x44C)
The physical end of the tape has been reached.
ERROR_FILEMARK_DETECTED
1101 (0x44D)
A tape access reached a filemark.
ERROR_BEGINNING_OF_MEDIA
1102 (0x44E)
The beginning of the tape or a partition was encountered.
ERROR_SETMARK_DETECTED
1103 (0x44F)
A tape access reached the end of a set of files.
ERROR_NO_DATA_DETECTED
1104 (0×450)
No more data is on the tape.
ERROR_PARTITION_FAILURE
1105 (0×451)
Tape could not be partitioned.
ERROR_INVALID_BLOCK_LENGTH
1106 (0×452)
When accessing a new tape of a multivolume partition, the current block size is incorrect.
ERROR_DEVICE_NOT_PARTITIONED
1107 (0×453)
Tape partition information could not be found when loading a tape.
ERROR_UNABLE_TO_LOCK_MEDIA
1108 (0×454)
Unable to lock the media eject mechanism.
ERROR_UNABLE_TO_UNLOAD_MEDIA
1109 (0×455)
Unable to unload the media.
ERROR_MEDIA_CHANGED
1110 (0×456)
The media in the drive may have changed.
ERROR_BUS_RESET
1111 (0×457)
The I/O bus was reset.
ERROR_NO_MEDIA_IN_DRIVE
1112 (0×458)
No media in drive.
ERROR_NO_UNICODE_TRANSLATION
1113 (0×459)
No mapping for the Unicode character exists in the target multi-byte code page.
ERROR_DLL_INIT_FAILED
1114 (0x45A)
A dynamic link library (DLL) initialization routine failed.
ERROR_SHUTDOWN_IN_PROGRESS
1115 (0x45B)
A system shutdown is in progress.
ERROR_NO_SHUTDOWN_IN_PROGRESS
1116 (0x45C)
Unable to abort the system shutdown because no shutdown was in progress.
ERROR_IO_DEVICE
1117 (0x45D)
The request could not be performed because of an I/O device error.
ERROR_SERIAL_NO_DEVICE
1118 (0x45E)
No serial device was successfully initialized. The serial driver will unload.
ERROR_IRQ_BUSY
1119 (0x45F)
Unable to open a device that was sharing an interrupt request (IRQ) with other devices. At least one other device that uses that IRQ was already opened.
ERROR_MORE_WRITES
1120 (0×460)
A serial I/O operation was completed by another write to the serial port. The IOCTL_SERIAL_XOFF_COUNTER reached zero.)
ERROR_COUNTER_TIMEOUT
1121 (0×461)
A serial I/O operation completed because the timeout period expired. The IOCTL_SERIAL_XOFF_COUNTER did not reach zero.)
ERROR_FLOPPY_ID_MARK_NOT_FOUND
1122 (0×462)
No ID address mark was found on the floppy disk.
ERROR_FLOPPY_WRONG_CYLINDER
1123 (0×463)
Mismatch between the floppy disk sector ID field and the floppy disk controller track address.
ERROR_FLOPPY_UNKNOWN_ERROR
1124 (0×464)
The floppy disk controller reported an error that is not recognized by the floppy disk driver.
ERROR_FLOPPY_BAD_REGISTERS
1125 (0×465)
The floppy disk controller returned inconsistent results in its registers.
ERROR_DISK_RECALIBRATE_FAILED
1126 (0×466)
While accessing the hard disk, a recalibrate operation failed, even after retries.
ERROR_DISK_OPERATION_FAILED
1127 (0×467)
While accessing the hard disk, a disk operation failed even after retries.
ERROR_DISK_RESET_FAILED
1128 (0×468)
While accessing the hard disk, a disk controller reset was needed, but even that failed.
ERROR_EOM_OVERFLOW
1129 (0×469)
Physical end of tape encountered.
ERROR_NOT_ENOUGH_SERVER_MEMORY
1130 (0x46A)
Not enough server storage is available to process this command.
ERROR_POSSIBLE_DEADLOCK
1131 (0x46B)
A potential deadlock condition has been detected.
ERROR_MAPPED_ALIGNMENT
1132 (0x46C)
The base address or the file offset specified does not have the proper alignment.
ERROR_SET_POWER_STATE_VETOED
1140 (0×474)
An attempt to change the system power state was vetoed by another application or driver.
ERROR_SET_POWER_STATE_FAILED
1141 (0×475)
The system BIOS failed an attempt to change the system power state.
ERROR_TOO_MANY_LINKS
1142 (0×476)
An attempt was made to create more links on a file than the file system supports.
ERROR_OLD_WIN_VERSION
1150 (0x47E)
The specified program requires a newer version of Windows.
ERROR_APP_WRONG_OS
1151 (0x47F)
The specified program is not a Windows or MS-DOS program.
ERROR_SINGLE_INSTANCE_APP
1152 (0×480)
Cannot start more than one instance of the specified program.
ERROR_RMODE_APP
1153 (0×481)
The specified program was written for an earlier version of Windows.
ERROR_INVALID_DLL
1154 (0×482)
One of the library files needed to run this application is damaged.
ERROR_NO_ASSOCIATION
1155 (0×483)
No application is associated with the specified file for this operation.
ERROR_DDE_FAIL
1156 (0×484)
An error occurred in sending the command to the application.
ERROR_DLL_NOT_FOUND
1157 (0×485)
One of the library files needed to run this application cannot be found.
ERROR_NO_MORE_USER_HANDLES
1158 (0×486)
The current process has used all of its system allowance of handles for Window Manager objects.
ERROR_MESSAGE_SYNC_ONLY
1159 (0×487)
The message can be used only with synchronous operations.
ERROR_SOURCE_ELEMENT_EMPTY
1160 (0×488)
The indicated source element has no media.
ERROR_DESTINATION_ELEMENT_FULL
1161 (0×489)
The indicated destination element already contains media.
ERROR_ILLEGAL_ELEMENT_ADDRESS
1162 (0x48A)
The indicated element does not exist.
ERROR_MAGAZINE_NOT_PRESENT
1163 (0x48B)
The indicated element is part of a magazine that is not present.
ERROR_DEVICE_REINITIALIZATION_NEEDED
1164 (0x48C)
The indicated device requires reinitialization due to hardware errors.
ERROR_DEVICE_REQUIRES_CLEANING
1165 (0x48D)
The device has indicated that cleaning is required before further operations are attempted.
ERROR_DEVICE_DOOR_OPEN
1166 (0x48E)
The device has indicated that its door is open.
ERROR_DEVICE_NOT_CONNECTED
1167 (0x48F)
The device is not connected.
ERROR_NOT_FOUND
1168 (0×490)
Element not found.
ERROR_NO_MATCH
1169 (0×491)
There was no match for the specified key in the index.
ERROR_SET_NOT_FOUND
1170 (0×492)
The property set specified does not exist on the object.
ERROR_POINT_NOT_FOUND
1171 (0×493)
The point passed to GetMouseMovePoints is not in the buffer.
ERROR_NO_TRACKING_SERVICE
1172 (0×494)
The tracking (workstation) service is not running.
ERROR_NO_VOLUME_ID
1173 (0×495)
The Volume ID could not be found.
ERROR_UNABLE_TO_REMOVE_REPLACED
1175 (0×497)
Unable to remove the file to be replaced.
ERROR_UNABLE_TO_MOVE_REPLACEMENT
1176 (0×498)
Unable to move the replacement file to the file to be replaced. The file to be replaced has retained its original name.
ERROR_UNABLE_TO_MOVE_REPLACEMENT_2
1177 (0×499)
Unable to move the replacement file to the file to be replaced. The file to be replaced has been renamed using the backup name.
ERROR_JOURNAL_DELETE_IN_PROGRESS
1178 (0x49A)
The volume change journal is being deleted.
ERROR_JOURNAL_NOT_ACTIVE
1179 (0x49B)
The volume change journal is not active.
ERROR_POTENTIAL_FILE_FOUND
1180 (0x49C)
A file was found, but it may not be the correct file.
ERROR_JOURNAL_ENTRY_DELETED
1181 (0x49D)
The journal entry has been deleted from the journal.
ERROR_SHUTDOWN_IS_SCHEDULED
1190 (0x4A6)
A system shutdown has already been scheduled.
ERROR_SHUTDOWN_USERS_LOGGED_ON
1191 (0x4A7)
The system shutdown cannot be initiated because there are other users logged on to the computer.
ERROR_BAD_DEVICE
1200 (0x4B0)
The specified device name is invalid.
ERROR_CONNECTION_UNAVAIL
1201 (0x4B1)
The device is not currently connected but it is a remembered connection.
ERROR_DEVICE_ALREADY_REMEMBERED
1202 (0x4B2)
The local device name has a remembered connection to another network resource.
ERROR_NO_NET_OR_BAD_PATH
1203 (0x4B3)
The network path was either typed incorrectly, does not exist, or the network provider is not currently available. Please try retyping the path or contact your network administrator.
ERROR_BAD_PROVIDER
1204 (0x4B4)
The specified network provider name is invalid.
ERROR_CANNOT_OPEN_PROFILE
1205 (0x4B5)
Unable to open the network connection profile.
ERROR_BAD_PROFILE
1206 (0x4B6)
The network connection profile is corrupted.
ERROR_NOT_CONTAINER
1207 (0x4B7)
Cannot enumerate a noncontainer.
ERROR_EXTENDED_ERROR
1208 (0x4B8)
An extended error has occurred.
ERROR_INVALID_GROUPNAME
1209 (0x4B9)
The format of the specified group name is invalid.
ERROR_INVALID_COMPUTERNAME
1210 (0x4BA)
The format of the specified computer name is invalid.
ERROR_INVALID_EVENTNAME
1211 (0x4BB)
The format of the specified event name is invalid.
ERROR_INVALID_DOMAINNAME
1212 (0x4BC)
The format of the specified domain name is invalid.
ERROR_INVALID_SERVICENAME
1213 (0x4BD)
The format of the specified service name is invalid.
ERROR_INVALID_NETNAME
1214 (0x4BE)
The format of the specified network name is invalid.
ERROR_INVALID_SHARENAME
1215 (0x4BF)
The format of the specified share name is invalid.
ERROR_INVALID_PASSWORDNAME
1216 (0x4C0)
The format of the specified password is invalid.
ERROR_INVALID_MESSAGENAME
1217 (0x4C1)
The format of the specified message name is invalid.
ERROR_INVALID_MESSAGEDEST
1218 (0x4C2)
The format of the specified message destination is invalid.
ERROR_SESSION_CREDENTIAL_CONFLICT
1219 (0x4C3)
Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again.
ERROR_REMOTE_SESSION_LIMIT_EXCEEDED
1220 (0x4C4)
An attempt was made to establish a session to a network server, but there are already too many sessions established to that server.
ERROR_DUP_DOMAINNAME
1221 (0x4C5)
The workgroup or domain name is already in use by another computer on the network.
ERROR_NO_NETWORK
1222 (0x4C6)
The network is not present or not started.
ERROR_CANCELLED
1223 (0x4C7)
The operation was canceled by the user.
ERROR_USER_MAPPED_FILE
1224 (0x4C8)
The requested operation cannot be performed on a file with a user-mapped section open.
ERROR_CONNECTION_REFUSED
1225 (0x4C9)
The remote computer refused the network connection.
ERROR_GRACEFUL_DISCONNECT
1226 (0x4CA)
The network connection was gracefully closed.
ERROR_ADDRESS_ALREADY_ASSOCIATED
1227 (0x4CB)
The network transport endpoint already has an address associated with it.
ERROR_ADDRESS_NOT_ASSOCIATED
1228 (0x4CC)
An address has not yet been associated with the network endpoint.
ERROR_CONNECTION_INVALID
1229 (0x4CD)
An operation was attempted on a nonexistent network connection.
ERROR_CONNECTION_ACTIVE
1230 (0x4CE)
An invalid operation was attempted on an active network connection.
ERROR_NETWORK_UNREACHABLE
1231 (0x4CF)
The network location cannot be reached. For information about network troubleshooting, see Windows Help.
ERROR_HOST_UNREACHABLE
1232 (0x4D0)
The network location cannot be reached. For information about network troubleshooting, see Windows Help.
ERROR_PROTOCOL_UNREACHABLE
1233 (0x4D1)
The network location cannot be reached. For information about network troubleshooting, see Windows Help.
ERROR_PORT_UNREACHABLE
1234 (0x4D2)
No service is operating at the destination network endpoint on the remote system.
ERROR_REQUEST_ABORTED
1235 (0x4D3)
The request was aborted.
ERROR_CONNECTION_ABORTED
1236 (0x4D4)
The network connection was aborted by the local system.
ERROR_RETRY
1237 (0x4D5)
The operation could not be completed. A retry should be performed.
ERROR_CONNECTION_COUNT_LIMIT
1238 (0x4D6)
A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached.
ERROR_LOGIN_TIME_RESTRICTION
1239 (0x4D7)
Attempting to log in during an unauthorized time of day for this account.
ERROR_LOGIN_WKSTA_RESTRICTION
1240 (0x4D8)
The account is not authorized to log in from this station.
ERROR_INCORRECT_ADDRESS
1241 (0x4D9)
The network address could not be used for the operation requested.
ERROR_ALREADY_REGISTERED
1242 (0x4DA)
The service is already registered.
ERROR_SERVICE_NOT_FOUND
1243 (0x4DB)
The specified service does not exist.
ERROR_NOT_AUTHENTICATED
1244 (0x4DC)
The operation being requested was not performed because the user has not been authenticated.
ERROR_NOT_LOGGED_ON
1245 (0x4DD)
The operation being requested was not performed because the user has not logged on to the network. The specified service does not exist.
ERROR_CONTINUE
1246 (0x4DE)
Continue with work in progress.
ERROR_ALREADY_INITIALIZED
1247 (0x4DF)
An attempt was made to perform an initialization operation when initialization has already been completed.
ERROR_NO_MORE_DEVICES
1248 (0x4E0)
No more local devices.
ERROR_NO_SUCH_SITE
1249 (0x4E1)
The specified site does not exist.
ERROR_DOMAIN_CONTROLLER_EXISTS
1250 (0x4E2)
A domain controller with the specified name already exists.
ERROR_ONLY_IF_CONNECTED
1251 (0x4E3)
This operation is supported only when you are connected to the server.
ERROR_OVERRIDE_NOCHANGES
1252 (0x4E4)
The group policy framework should call the extension even if there are no changes.
ERROR_BAD_USER_PROFILE
1253 (0x4E5)
The specified user does not have a valid profile.
ERROR_NOT_SUPPORTED_ON_SBS
1254 (0x4E6)
This operation is not supported on a computer running Windows Server 2003 for Small Business Server
ERROR_SERVER_SHUTDOWN_IN_PROGRESS
1255 (0x4E7)
The server machine is shutting down.
ERROR_HOST_DOWN
1256 (0x4E8)
The remote system is not available. For information about network troubleshooting, see Windows Help.
ERROR_NON_ACCOUNT_SID
1257 (0x4E9)
The security identifier provided is not from an account domain.
ERROR_NON_DOMAIN_SID
1258 (0x4EA)
The security identifier provided does not have a domain component.
ERROR_APPHELP_BLOCK
1259 (0x4EB)
AppHelp dialog canceled thus preventing the application from starting.
ERROR_ACCESS_DISABLED_BY_POLICY
1260 (0x4EC)
This program is blocked by group policy. For more information, contact your system administrator.
ERROR_REG_NAT_CONSUMPTION
1261 (0x4ED)
A program attempt to use an invalid register value. Normally caused by an uninitialized register. This error is Itanium specific.
ERROR_CSCSHARE_OFFLINE
1262 (0x4EE)
The share is currently offline or does not exist.
ERROR_PKINIT_FAILURE
1263 (0x4EF)
The Kerberos protocol encountered an error while validating the KDC certificate during smartcard logon. There is more information in the system event log.
ERROR_SMARTCARD_SUBSYSTEM_FAILURE
1264 (0x4F0)
The Kerberos protocol encountered an error while attempting to utilize the smartcard subsystem.
ERROR_DOWNGRADE_DETECTED
1265 (0x4F1)
The system detected a possible attempt to compromise security. Please ensure that you can contact the server that authenticated you.
ERROR_MACHINE_LOCKED
1271 (0x4F7)
The machine is locked and cannot be shut down without the force option.
ERROR_CALLBACK_SUPPLIED_INVALID_DATA
1273 (0x4F9)
An application-defined callback gave invalid data when called.
ERROR_SYNC_FOREGROUND_REFRESH_REQUIRED
1274 (0x4FA)
The group policy framework should call the extension in the synchronous foreground policy refresh.
ERROR_DRIVER_BLOCKED
1275 (0x4FB)
This driver has been blocked from loading
ERROR_INVALID_IMPORT_OF_NON_DLL
1276 (0x4FC)
A dynamic link library (DLL) referenced a module that was neither a DLL nor the process’s executable image.
ERROR_ACCESS_DISABLED_WEBBLADE
1277 (0x4FD)
Windows cannot open this program since it has been disabled.
ERROR_ACCESS_DISABLED_WEBBLADE_TAMPER
1278 (0x4FE)
Windows cannot open this program because the license enforcement system has been tampered with or become corrupted.
ERROR_RECOVERY_FAILURE
1279 (0x4FF)
A transaction recover failed.
ERROR_ALREADY_FIBER
1280 (0×500)
The current thread has already been converted to a fiber.
ERROR_ALREADY_THREAD
1281 (0×501)
The current thread has already been converted from a fiber.
ERROR_STACK_BUFFER_OVERRUN
1282 (0×502)
The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
ERROR_PARAMETER_QUOTA_EXCEEDED
1283 (0×503)
Data present in one of the parameters is more than the function can operate on.
ERROR_DEBUGGER_INACTIVE
1284 (0×504)
An attempt to do an operation on a debug object failed because the object is in the process of being deleted.
ERROR_DELAY_LOAD_FAILED
1285 (0×505)
An attempt to delay-load a .dll or get a function address in a delay-loaded .dll failed.
ERROR_VDM_DISALLOWED
1286 (0×506)
%1 is a 16-bit application. You do not have permissions to execute 16-bit applications. Check your permissions with your system administrator.
ERROR_UNIDENTIFIED_ERROR
1287 (0×507)
Insufficient information exists to identify the cause of failure.
ERROR_INVALID_CRUNTIME_PARAMETER
1288 (0×508)
The parameter passed to a C runtime function is incorrect.
ERROR_BEYOND_VDL
1289 (0×509)
The operation occurred beyond the valid data length of the file.
ERROR_INCOMPATIBLE_SERVICE_SID_TYPE
1290 (0x50A)
The service start failed since one or more services in the same process have an incompatible service SID type setting. A service with restricted service SID type can only coexist in the same process with other services with a restricted SID type. If the service SID type for this service was just configured, the hosting process must be restarted in order to start this service.

On Windows Server 2003 and Windows XP, an unrestricted service cannot coexist in the same process with other services. The service with the unrestricted service SID type must be moved to an owned process in order to start this service.

ERROR_DRIVER_PROCESS_TERMINATED
1291 (0x50B)
The process hosting the driver for this device has been terminated.
ERROR_IMPLEMENTATION_LIMIT
1292 (0x50C)
An operation attempted to exceed an implementation-defined limit.
ERROR_PROCESS_IS_PROTECTED
1293 (0x50D)
Either the target process, or the target thread’s containing process, is a protected process.
ERROR_SERVICE_NOTIFY_CLIENT_LAGGING
1294 (0x50E)
The service notification client is lagging too far behind the current state of services in the machine.
ERROR_DISK_QUOTA_EXCEEDED
1295 (0x50F)
The requested file operation failed because the storage quota was exceeded. To free up disk space, move files to a different location or delete unnecessary files. For more information, contact your system administrator.
ERROR_CONTENT_BLOCKED
1296 (0×510)
The requested files operation failed because the storage policy blocks that type of file. For more information, contact your system administrator.
ERROR_INCOMPATIBLE_SERVICE_PRIVILEGE
1297 (0×511)
A privilege that the service requires to function properly does not exist in the service account configuration. You may use the Services Microsoft Management Console (MMC) snap-in (services.msc) and the Local Security Settings MMC snap-in (secpol.msc) to view the service configuration and the account configuration.
ERROR_APP_HANG
1298 (0×512)
A thread involved in this operation appears to be unresponsive.
ERROR_INVALID_LABEL
1299 (0×513)
Indicates a particular Security ID may not be assigned as the label of an object.
Constant/value Description
ERROR_USER_PROFILE_LOAD
500 (0x1F4)
User profile cannot be loaded.
ERROR_ARITHMETIC_OVERFLOW
534 (0×216)
Arithmetic result exceeded 32 bits.
ERROR_PIPE_CONNECTED
535 (0×217)
There is a process on other end of the pipe.
ERROR_PIPE_LISTENING
536 (0×218)
Waiting for a process to open the other end of the pipe.
ERROR_VERIFIER_STOP
537 (0×219)
Application verifier has found an error in the current process.
ERROR_ABIOS_ERROR
538 (0x21A)
An error occurred in the ABIOS subsystem.
ERROR_WX86_WARNING
539 (0x21B)
A warning occurred in the WX86 subsystem.
ERROR_WX86_ERROR
540 (0x21C)
An error occurred in the WX86 subsystem.
ERROR_TIMER_NOT_CANCELED
541 (0x21D)
An attempt was made to cancel or set a timer that has an associated APC and the subject thread is not the thread that originally set the timer with an associated APC routine.
ERROR_UNWIND
542 (0x21E)
Unwind exception code.
ERROR_BAD_STACK
543 (0x21F)
An invalid or unaligned stack was encountered during an unwind operation.
ERROR_INVALID_UNWIND_TARGET
544 (0×220)
An invalid unwind target was encountered during an unwind operation.
ERROR_INVALID_PORT_ATTRIBUTES
545 (0×221)
Invalid Object Attributes specified to NtCreatePort or invalid Port Attributes specified to NtConnectPort.
ERROR_PORT_MESSAGE_TOO_LONG
546 (0×222)
Length of message passed to NtRequestPort or NtRequestWaitReplyPort was longer than the maximum message allowed by the port.
ERROR_INVALID_QUOTA_LOWER
547 (0×223)
An attempt was made to lower a quota limit below the current usage.
ERROR_DEVICE_ALREADY_ATTACHED
548 (0×224)
An attempt was made to attach to a device that was already attached to another device.
ERROR_INSTRUCTION_MISALIGNMENT
549 (0×225)
An attempt was made to execute an instruction at an unaligned address and the host system does not support unaligned instruction references.
ERROR_PROFILING_NOT_STARTED
550 (0×226)
Profiling not started.
ERROR_PROFILING_NOT_STOPPED
551 (0×227)
Profiling not stopped.
ERROR_COULD_NOT_INTERPRET
552 (0×228)
The passed ACL did not contain the minimum required information.
ERROR_PROFILING_AT_LIMIT
553 (0×229)
The number of active profiling objects is at the maximum and no more may be started.
ERROR_CANT_WAIT
554 (0x22A)
Used to indicate that an operation cannot continue without blocking for I/O.
ERROR_CANT_TERMINATE_SELF
555 (0x22B)
Indicates that a thread attempted to terminate itself by default (called NtTerminateThread with NULL) and it was the last thread in the current process.
ERROR_UNEXPECTED_MM_CREATE_ERR
556 (0x22C)
If an MM error is returned which is not defined in the standard FsRtl filter, it is converted to one of the following errors which is guaranteed to be in the filter. In this case information is lost, however, the filter correctly handles the exception.
ERROR_UNEXPECTED_MM_MAP_ERROR
557 (0x22D)
If an MM error is returned which is not defined in the standard FsRtl filter, it is converted to one of the following errors which is guaranteed to be in the filter. In this case information is lost, however, the filter correctly handles the exception.
ERROR_UNEXPECTED_MM_EXTEND_ERR
558 (0x22E)
If an MM error is returned which is not defined in the standard FsRtl filter, it is converted to one of the following errors which is guaranteed to be in the filter. In this case information is lost, however, the filter correctly handles the exception.
ERROR_BAD_FUNCTION_TABLE
559 (0x22F)
A malformed function table was encountered during an unwind operation.
ERROR_NO_GUID_TRANSLATION
560 (0×230)
Indicates that an attempt was made to assign protection to a file system file or directory and one of the SIDs in the security descriptor could not be translated into a GUID that could be stored by the file system. This causes the protection attempt to fail, which may cause a file creation attempt to fail.
ERROR_INVALID_LDT_SIZE
561 (0×231)
Indicates that an attempt was made to grow an LDT by setting its size, or that the size was not an even number of selectors.
ERROR_INVALID_LDT_OFFSET
563 (0×233)
Indicates that the starting value for the LDT information was not an integral multiple of the selector size.
ERROR_INVALID_LDT_DESCRIPTOR
564 (0×234)
Indicates that the user supplied an invalid descriptor when trying to set up Ldt descriptors.
ERROR_TOO_MANY_THREADS
565 (0×235)
Indicates a process has too many threads to perform the requested action. For example, assignment of a primary token may only be performed when a process has zero or one threads.
ERROR_THREAD_NOT_IN_PROCESS
566 (0×236)
An attempt was made to operate on a thread within a specific process, but the thread specified is not in the process specified.
ERROR_PAGEFILE_QUOTA_EXCEEDED
567 (0×237)
Page file quota was exceeded.
ERROR_LOGON_SERVER_CONFLICT
568 (0×238)
The Netlogon service cannot start because another Netlogon service running in the domain conflicts with the specified role.
ERROR_SYNCHRONIZATION_REQUIRED
569 (0×239)
The SAM database on a Windows Server is significantly out of synchronization with the copy on the Domain Controller. A complete synchronization is required.
ERROR_NET_OPEN_FAILED
570 (0x23A)
The NtCreateFile API failed. This error should never be returned to an application, it is a place holder for the Windows Lan Manager Redirector to use in its internal error mapping routines.
ERROR_IO_PRIVILEGE_FAILED
571 (0x23B)
{Privilege Failed} The I/O permissions for the process could not be changed.
ERROR_CONTROL_C_EXIT
572 (0x23C)
{Application Exit by CTRL+C} The application terminated as a result of a CTRL+C.
ERROR_MISSING_SYSTEMFILE
573 (0x23D)
{Missing System File} The required system file %hs is bad or missing.
ERROR_UNHANDLED_EXCEPTION
574 (0x23E)
{Application Error} The exception %s (0x%08lx) occurred in the application at location 0x%08lx.
ERROR_APP_INIT_FAILURE
575 (0x23F)
{Application Error} The application failed to initialize properly (0x%lx). Click OK to terminate the application.
ERROR_PAGEFILE_CREATE_FAILED
576 (0×240)
{Unable to Create Paging File} The creation of the paging file %hs failed (%lx). The requested size was %ld.
ERROR_INVALID_IMAGE_HASH
577 (0×241)
Windows cannot verify the digital signature for this file. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source.
ERROR_NO_PAGEFILE
578 (0×242)
{No Paging File Specified} No paging file was specified in the system configuration.
ERROR_ILLEGAL_FLOAT_CONTEXT
579 (0×243)
{EXCEPTION} A real-mode application issued a floating-point instruction and floating-point hardware is not present.
ERROR_NO_EVENT_PAIR
580 (0×244)
An event pair synchronization operation was performed using the thread specific client/server event pair object, but no event pair object was associated with the thread.
ERROR_DOMAIN_CTRLR_CONFIG_ERROR
581 (0×245)
A Windows Server has an incorrect configuration.
ERROR_ILLEGAL_CHARACTER
582 (0×246)
An illegal character was encountered. For a multi-byte character set this includes a lead byte without a succeeding trail byte. For the Unicode character set this includes the characters 0xFFFF and 0xFFFE.
ERROR_UNDEFINED_CHARACTER
583 (0×247)
The Unicode character is not defined in the Unicode character set installed on the system.
ERROR_FLOPPY_VOLUME
584 (0×248)
The paging file cannot be created on a floppy diskette.
ERROR_BIOS_FAILED_TO_CONNECT_INTERRUPT
585 (0×249)
The system BIOS failed to connect a system interrupt to the device or bus for which the device is connected.
ERROR_BACKUP_CONTROLLER
586 (0x24A)
This operation is only allowed for the Primary Domain Controller of the domain.
ERROR_MUTANT_LIMIT_EXCEEDED
587 (0x24B)
An attempt was made to acquire a mutant such that its maximum count would have been exceeded.
ERROR_FS_DRIVER_REQUIRED
588 (0x24C)
A volume has been accessed for which a file system driver is required that has not yet been loaded.
ERROR_CANNOT_LOAD_REGISTRY_FILE
589 (0x24D)
{Registry File Failure} The registry cannot load the hive (file): %hs or its log or alternate. It is corrupt, absent, or not writable.
ERROR_DEBUG_ATTACH_FAILED
590 (0x24E)
{Unexpected Failure in DebugActiveProcess} An unexpected failure occurred while processing a DebugActiveProcess API request. You may choose OK to terminate the process, or Cancel to ignore the error.
ERROR_SYSTEM_PROCESS_TERMINATED
591 (0x24F)
{Fatal System Error} The %hs system process terminated unexpectedly with a status of 0x%08x (0x%08x 0x%08x). The system has been shut down.
ERROR_DATA_NOT_ACCEPTED
592 (0×250)
{Data Not Accepted} The TDI client could not handle the data received during an indication.
ERROR_VDM_HARD_ERROR
593 (0×251)
NTVDM encountered a hard error.
ERROR_DRIVER_CANCEL_TIMEOUT
594 (0×252)
{Cancel Timeout} The driver %hs failed to complete a canceled I/O request in the allotted time.
ERROR_REPLY_MESSAGE_MISMATCH
595 (0×253)
{Reply Message Mismatch} An attempt was made to reply to an LPC message, but the thread specified by the client ID in the message was not waiting on that message.
ERROR_LOST_WRITEBEHIND_DATA
596 (0×254)
{Delayed Write Failed} Windows was unable to save all the data for the file %hs. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere.
ERROR_CLIENT_SERVER_PARAMETERS_INVALID
597 (0×255)
The parameter(s) passed to the server in the client/server shared memory window were invalid. Too much data may have been put in the shared memory window.
ERROR_NOT_TINY_STREAM
598 (0×256)
The stream is not a tiny stream.
ERROR_STACK_OVERFLOW_READ
599 (0×257)
The request must be handled by the stack overflow code.
ERROR_CONVERT_TO_LARGE
600 (0×258)
Internal OFS status codes indicating how an allocation operation is handled. Either it is retried after the containing node is moved or the extent stream is converted to a large stream.
ERROR_FOUND_OUT_OF_SCOPE
601 (0×259)
The attempt to find the object found an object matching by ID on the volume but it is out of the scope of the handle used for the operation.
ERROR_ALLOCATE_BUCKET
602 (0x25A)
The bucket array must be grown. Retry transaction after doing so.
ERROR_MARSHALL_OVERFLOW
603 (0x25B)
The user/kernel marshalling buffer has overflowed.
ERROR_INVALID_VARIANT
604 (0x25C)
The supplied variant structure contains invalid data.
ERROR_BAD_COMPRESSION_BUFFER
605 (0x25D)
The specified buffer contains ill-formed data.
ERROR_AUDIT_FAILED
606 (0x25E)
{Audit Failed} An attempt to generate a security audit failed.
ERROR_TIMER_RESOLUTION_NOT_SET
607 (0x25F)
The timer resolution was not previously set by the current process.
ERROR_INSUFFICIENT_LOGON_INFO
608 (0×260)
There is insufficient account information to log you on.
ERROR_BAD_DLL_ENTRYPOINT
609 (0×261)
{Invalid DLL Entry point} The dynamic link library %hs is not written correctly. The stack pointer has been left in an inconsistent state. The entry point should be declared as WINAPI or STDCALL. Select YES to fail the DLL load. Select NO to continue execution. Selecting NO may cause the application to operate incorrectly.
ERROR_BAD_SERVICE_ENTRYPOINT
610 (0×262)
{Invalid Service Callback Entry point} The %hs service is not written correctly. The stack pointer has been left in an inconsistent state. The callback entry point should be declared as WINAPI or STDCALL. Selecting OK will cause the service to continue operation. However, the service process may operate incorrectly.
ERROR_IP_ADDRESS_CONFLICT1
611 (0×263)
There is an IP address conflict with another system on the network
ERROR_IP_ADDRESS_CONFLICT2
612 (0×264)
There is an IP address conflict with another system on the network
ERROR_REGISTRY_QUOTA_LIMIT
613 (0×265)
{Low On Registry Space} The system has reached the maximum size allowed for the system part of the registry. Additional storage requests will be ignored.
ERROR_NO_CALLBACK_ACTIVE
614 (0×266)
A callback return system service cannot be executed when no callback is active.
ERROR_PWD_TOO_SHORT
615 (0×267)
The password provided is too short to meet the policy of your user account. Please choose a longer password.
ERROR_PWD_TOO_RECENT
616 (0×268)
The policy of your user account does not allow you to change passwords too frequently. This is done to prevent users from changing back to a familiar, but potentially discovered, password. If you feel your password has been compromised then please contact your administrator immediately to have a new one assigned.
ERROR_PWD_HISTORY_CONFLICT
617 (0×269)
You have attempted to change your password to one that you have used in the past. The policy of your user account does not allow this. Please select a password that you have not previously used.
ERROR_UNSUPPORTED_COMPRESSION
618 (0x26A)
The specified compression format is unsupported.
ERROR_INVALID_HW_PROFILE
619 (0x26B)
The specified hardware profile configuration is invalid.
ERROR_INVALID_PLUGPLAY_DEVICE_PATH
620 (0x26C)
The specified Plug and Play registry device path is invalid.
ERROR_QUOTA_LIST_INCONSISTENT
621 (0x26D)
The specified quota list is internally inconsistent with its descriptor.
ERROR_EVALUATION_EXPIRATION
622 (0x26E)
{Windows Evaluation Notification} The evaluation period for this installation of Windows has expired. This system will shutdown in 1 hour. To restore access to this installation of Windows, please upgrade this installation using a licensed distribution of this product.
ERROR_ILLEGAL_DLL_RELOCATION
623 (0x26F)
{Illegal System DLL Relocation} The system DLL %hs was relocated in memory. The application will not run properly. The relocation occurred because the DLL %hs occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL.
ERROR_DLL_INIT_FAILED_LOGOFF
624 (0×270)
{DLL Initialization Failed} The application failed to initialize because the window station is shutting down.
ERROR_VALIDATE_CONTINUE
625 (0×271)
The validation process needs to continue on to the next step.
ERROR_NO_MORE_MATCHES
626 (0×272)
There are no more matches for the current index enumeration.
ERROR_RANGE_LIST_CONFLICT
627 (0×273)
The range could not be added to the range list because of a conflict.
ERROR_SERVER_SID_MISMATCH
628 (0×274)
The server process is running under a SID different than that required by client.
ERROR_CANT_ENABLE_DENY_ONLY
629 (0×275)
A group marked use for deny only cannot be enabled.
ERROR_FLOAT_MULTIPLE_FAULTS
630 (0×276)
{EXCEPTION} Multiple floating point faults.
ERROR_FLOAT_MULTIPLE_TRAPS
631 (0×277)
{EXCEPTION} Multiple floating point traps.
ERROR_NOINTERFACE
632 (0×278)
The requested interface is not supported.
ERROR_DRIVER_FAILED_SLEEP
633 (0×279)
{System Standby Failed} The driver %hs does not support standby mode. Updating this driver may allow the system to go to standby mode.
ERROR_CORRUPT_SYSTEM_FILE
634 (0x27A)
The system file %1 has become corrupt and has been replaced.
ERROR_COMMITMENT_MINIMUM
635 (0x27B)
{Virtual Memory Minimum Too Low} Your system is low on virtual memory. Windows is increasing the size of your virtual memory paging file. During this process, memory requests for some applications may be denied. For more information, see Help.
ERROR_PNP_RESTART_ENUMERATION
636 (0x27C)
A device was removed so enumeration must be restarted.
ERROR_SYSTEM_IMAGE_BAD_SIGNATURE
637 (0x27D)
{Fatal System Error} The system image %s is not properly signed. The file has been replaced with the signed file. The system has been shut down.
ERROR_PNP_REBOOT_REQUIRED
638 (0x27E)
Device will not start without a reboot.
ERROR_INSUFFICIENT_POWER
639 (0x27F)
There is not enough power to complete the requested operation.
ERROR_MULTIPLE_FAULT_VIOLATION
640 (0×280)
ERROR_MULTIPLE_FAULT_VIOLATION
ERROR_SYSTEM_SHUTDOWN
641 (0×281)
The system is in the process of shutting down.
ERROR_PORT_NOT_SET
642 (0×282)
An attempt to remove a processes DebugPort was made, but a port was not already associated with the process.
ERROR_DS_VERSION_CHECK_FAILURE
643 (0×283)
This version of Windows is not compatible with the behavior version of directory forest, domain or domain controller.
ERROR_RANGE_NOT_FOUND
644 (0×284)
The specified range could not be found in the range list.
ERROR_NOT_SAFE_MODE_DRIVER
646 (0×286)
The driver was not loaded because the system is booting into safe mode.
ERROR_FAILED_DRIVER_ENTRY
647 (0×287)
The driver was not loaded because it failed it’s initialization call.
ERROR_DEVICE_ENUMERATION_ERROR
648 (0×288)
The “%hs” encountered an error while applying power or reading the device configuration. This may be caused by a failure of your hardware or by a poor connection.
ERROR_MOUNT_POINT_NOT_RESOLVED
649 (0×289)
The create operation failed because the name contained at least one mount point which resolves to a volume to which the specified device object is not attached.
ERROR_INVALID_DEVICE_OBJECT_PARAMETER
650 (0x28A)
The device object parameter is either not a valid device object or is not attached to the volume specified by the file name.
ERROR_MCA_OCCURED
651 (0x28B)
A Machine Check Error has occurred. Please check the system event log for additional information.
ERROR_DRIVER_DATABASE_ERROR
652 (0x28C)
There was error [%2] processing the driver database.
ERROR_SYSTEM_HIVE_TOO_LARGE
653 (0x28D)
System hive size has exceeded its limit.
ERROR_DRIVER_FAILED_PRIOR_UNLOAD
654 (0x28E)
The driver could not be loaded because a previous version of the driver is still in memory.
ERROR_VOLSNAP_PREPARE_HIBERNATE
655 (0x28F)
{Volume Shadow Copy Service} Please wait while the Volume Shadow Copy Service prepares volume %hs for hibernation.
ERROR_HIBERNATION_FAILURE
656 (0×290)
The system has failed to hibernate (The error code is %hs). Hibernation will be disabled until the system is restarted.
ERROR_FILE_SYSTEM_LIMITATION
665 (0×299)
The requested operation could not be completed due to a file system limitation
ERROR_ASSERTION_FAILURE
668 (0x29C)
An assertion failure has occurred.
ERROR_ACPI_ERROR
669 (0x29D)
An error occurred in the ACPI subsystem.
ERROR_WOW_ASSERTION
670 (0x29E)
WOW Assertion Error.
ERROR_PNP_BAD_MPS_TABLE
671 (0x29F)
A device is missing in the system BIOS MPS table. This device will not be used. Please contact your system vendor for system BIOS update.
ERROR_PNP_TRANSLATION_FAILED
672 (0x2A0)
A translator failed to translate resources.
ERROR_PNP_IRQ_TRANSLATION_FAILED
673 (0x2A1)
A IRQ translator failed to translate resources.
ERROR_PNP_INVALID_ID
674 (0x2A2)
Driver %2 returned invalid ID for a child device (%3).
ERROR_WAKE_SYSTEM_DEBUGGER
675 (0x2A3)
{Kernel Debugger Awakened} the system debugger was awakened by an interrupt.
ERROR_HANDLES_CLOSED
676 (0x2A4)
{Handles Closed} Handles to objects have been automatically closed as a result of the requested operation.
ERROR_EXTRANEOUS_INFORMATION
677 (0x2A5)
{Too Much Information} The specified access control list (ACL) contained more information than was expected.
ERROR_RXACT_COMMIT_NECESSARY
678 (0x2A6)
This warning level status indicates that the transaction state already exists for the registry sub-tree, but that a transaction commit was previously aborted. The commit has NOT been completed, but has not been rolled back either (so it may still be committed if desired).
ERROR_MEDIA_CHECK
679 (0x2A7)
{Media Changed} The media may have changed.
ERROR_GUID_SUBSTITUTION_MADE
680 (0x2A8)
{GUID Substitution} During the translation of a global identifier (GUID) to a Windows security ID (SID), no administratively-defined GUID prefix was found. A substitute prefix was used, which will not compromise system security. However, this may provide a more restrictive access than intended.
ERROR_STOPPED_ON_SYMLINK
681 (0x2A9)
The create operation stopped after reaching a symbolic link
ERROR_LONGJUMP
682 (0x2AA)
A long jump has been executed.
ERROR_PLUGPLAY_QUERY_VETOED
683 (0x2AB)
The Plug and Play query operation was not successful.
ERROR_UNWIND_CONSOLIDATE
684 (0x2AC)
A frame consolidation has been executed.
ERROR_REGISTRY_HIVE_RECOVERED
685 (0x2AD)
{Registry Hive Recovered} Registry hive (file): %hs was corrupted and it has been recovered. Some data might have been lost.
ERROR_DLL_MIGHT_BE_INSECURE
686 (0x2AE)
The application is attempting to run executable code from the module %hs. This may be insecure. An alternative, %hs, is available. Should the application use the secure module %hs?
ERROR_DLL_MIGHT_BE_INCOMPATIBLE
687 (0x2AF)
The application is loading executable code from the module %hs. This is secure, but may be incompatible with previous releases of the operating system. An alternative, %hs, is available. Should the application use the secure module %hs?
ERROR_DBG_EXCEPTION_NOT_HANDLED
688 (0x2B0)
Debugger did not handle the exception.
ERROR_DBG_REPLY_LATER
689 (0x2B1)
Debugger will reply later.
ERROR_DBG_UNABLE_TO_PROVIDE_HANDLE
690 (0x2B2)
Debugger cannot provide handle.
ERROR_DBG_TERMINATE_THREAD
691 (0x2B3)
Debugger terminated thread.
ERROR_DBG_TERMINATE_PROCESS
692 (0x2B4)
Debugger terminated process.
ERROR_DBG_CONTROL_C
693 (0x2B5)
Debugger got control C.
ERROR_DBG_PRINTEXCEPTION_C
694 (0x2B6)
Debugger printed exception on control C.
ERROR_DBG_RIPEXCEPTION
695 (0x2B7)
Debugger received RIP exception.
ERROR_DBG_CONTROL_BREAK
696 (0x2B8)
Debugger received control break.
ERROR_DBG_COMMAND_EXCEPTION
697 (0x2B9)
Debugger command communication exception.
ERROR_OBJECT_NAME_EXISTS
698 (0x2BA)
{Object Exists} An attempt was made to create an object and the object name already existed.
ERROR_THREAD_WAS_SUSPENDED
699 (0x2BB)
{Thread Suspended} A thread termination occurred while the thread was suspended. The thread was resumed, and termination proceeded.
ERROR_IMAGE_NOT_AT_BASE
700 (0x2BC)
{Image Relocated} An image file could not be mapped at the address specified in the image file. Local fixups must be performed on this image.
ERROR_RXACT_STATE_CREATED
701 (0x2BD)
This informational level status indicates that a specified registry sub-tree transaction state did not yet exist and had to be created.
ERROR_SEGMENT_NOTIFICATION
702 (0x2BE)
{Segment Load} A virtual DOS machine (VDM) is loading, unloading, or moving an MS-DOS or Win16 program segment image. An exception is raised so a debugger can load, unload or track symbols and breakpoints within these 16-bit segments.
ERROR_BAD_CURRENT_DIRECTORY
703 (0x2BF)
{Invalid Current Directory} The process cannot switch to the startup current directory %hs. Select OK to set current directory to %hs, or select CANCEL to exit.
ERROR_FT_READ_RECOVERY_FROM_BACKUP
704 (0x2C0)
{Redundant Read} To satisfy a read request, the NT fault-tolerant file system successfully read the requested data from a redundant copy. This was done because the file system encountered a failure on a member of the fault-tolerant volume, but was unable to reassign the failing area of the device.
ERROR_FT_WRITE_RECOVERY
705 (0x2C1)
{Redundant Write} To satisfy a write request, the NT fault-tolerant file system successfully wrote a redundant copy of the information. This was done because the file system encountered a failure on a member of the fault-tolerant volume, but was not able to reassign the failing area of the device.
ERROR_IMAGE_MACHINE_TYPE_MISMATCH
706 (0x2C2)
{Machine Type Mismatch} The image file %hs is valid, but is for a machine type other than the current machine. Select OK to continue, or CANCEL to fail the DLL load.
ERROR_RECEIVE_PARTIAL
707 (0x2C3)
{Partial Data Received} The network transport returned partial data to its client. The remaining data will be sent later.
ERROR_RECEIVE_EXPEDITED
708 (0x2C4)
{Expedited Data Received} The network transport returned data to its client that was marked as expedited by the remote system.
ERROR_RECEIVE_PARTIAL_EXPEDITED
709 (0x2C5)
{Partial Expedited Data Received} The network transport returned partial data to its client and this data was marked as expedited by the remote system. The remaining data will be sent later.
ERROR_EVENT_DONE
710 (0x2C6)
{TDI Event Done} The TDI indication has completed successfully.
ERROR_EVENT_PENDING
711 (0x2C7)
{TDI Event Pending} The TDI indication has entered the pending state.
ERROR_CHECKING_FILE_SYSTEM
712 (0x2C8)
Checking file system on %wZ
ERROR_FATAL_APP_EXIT
713 (0x2C9)
{Fatal Application Exit} %hs
ERROR_PREDEFINED_HANDLE
714 (0x2CA)
The specified registry key is referenced by a predefined handle.
ERROR_WAS_UNLOCKED
715 (0x2CB)
{Page Unlocked} The page protection of a locked page was changed to ‘No Access’ and the page was unlocked from memory and from the process.
ERROR_SERVICE_NOTIFICATION
716 (0x2CC)
%hs
ERROR_WAS_LOCKED
717 (0x2CD)
{Page Locked} One of the pages to lock was already locked.
ERROR_LOG_HARD_ERROR
718 (0x2CE)
Application popup: %1 : %2
ERROR_ALREADY_WIN32
719 (0x2CF)
ERROR_ALREADY_WIN32
ERROR_IMAGE_MACHINE_TYPE_MISMATCH_EXE
720 (0x2D0)
{Machine Type Mismatch} The image file %hs is valid, but is for a machine type other than the current machine.
ERROR_NO_YIELD_PERFORMED
721 (0x2D1)
A yield execution was performed and no thread was available to run.
ERROR_TIMER_RESUME_IGNORED
722 (0x2D2)
The resumable flag to a timer API was ignored.
ERROR_ARBITRATION_UNHANDLED
723 (0x2D3)
The arbiter has deferred arbitration of these resources to its parent
ERROR_CARDBUS_NOT_SUPPORTED
724 (0x2D4)
The inserted CardBus device cannot be started because of a configuration error on “%hs”.
ERROR_MP_PROCESSOR_MISMATCH
725 (0x2D5)
The CPUs in this multiprocessor system are not all the same revision level. To use all processors the operating system restricts itself to the features of the least capable processor in the system. Should problems occur with this system, contact the CPU manufacturer to see if this mix of processors is supported.
ERROR_HIBERNATED
726 (0x2D6)
The system was put into hibernation.
ERROR_RESUME_HIBERNATION
727 (0x2D7)
The system was resumed from hibernation.
ERROR_FIRMWARE_UPDATED
728 (0x2D8)
Windows has detected that the system firmware (BIOS) was updated [previous firmware date = %2, current firmware date %3].
ERROR_DRIVERS_LEAKING_LOCKED_PAGES
729 (0x2D9)
A device driver is leaking locked I/O pages causing system degradation. The system has automatically enabled tracking code in order to try and catch the culprit.
ERROR_WAKE_SYSTEM
730 (0x2DA)
The system has awoken
ERROR_WAIT_1
731 (0x2DB)
ERROR_WAIT_1
ERROR_WAIT_2
732 (0x2DC)
ERROR_WAIT_2
ERROR_WAIT_3
733 (0x2DD)
ERROR_WAIT_3
ERROR_WAIT_63
734 (0x2DE)
ERROR_WAIT_63
ERROR_ABANDONED_WAIT_0
735 (0x2DF)
ERROR_ABANDONED_WAIT_0
ERROR_ABANDONED_WAIT_63
736 (0x2E0)
ERROR_ABANDONED_WAIT_63
ERROR_USER_APC
737 (0x2E1)
ERROR_USER_APC
ERROR_KERNEL_APC
738 (0x2E2)
ERROR_KERNEL_APC
ERROR_ALERTED
739 (0x2E3)
ERROR_ALERTED
ERROR_ELEVATION_REQUIRED
740 (0x2E4)
The requested operation requires elevation.
ERROR_REPARSE
741 (0x2E5)
A reparse should be performed by the Object Manager since the name of the file resulted in a symbolic link.
ERROR_OPLOCK_BREAK_IN_PROGRESS
742 (0x2E6)
An open/create operation completed while an oplock break is underway.
ERROR_VOLUME_MOUNTED
743 (0x2E7)
A new volume has been mounted by a file system.
ERROR_RXACT_COMMITTED
744 (0x2E8)
This success level status indicates that the transaction state already exists for the registry sub-tree, but that a transaction commit was previously aborted. The commit has now been completed.
ERROR_NOTIFY_CLEANUP
745 (0x2E9)
This indicates that a notify change request has been completed due to closing the handle which made the notify change request.
ERROR_PRIMARY_TRANSPORT_CONNECT_FAILED
746 (0x2EA)
{Connect Failure on Primary Transport} An attempt was made to connect to the remote server %hs on the primary transport, but the connection failed. The computer WAS able to connect on a secondary transport.
ERROR_PAGE_FAULT_TRANSITION
747 (0x2EB)
Page fault was a transition fault.
ERROR_PAGE_FAULT_DEMAND_ZERO
748 (0x2EC)
Page fault was a demand zero fault.
ERROR_PAGE_FAULT_COPY_ON_WRITE
749 (0x2ED)
Page fault was a demand zero fault.
ERROR_PAGE_FAULT_GUARD_PAGE
750 (0x2EE)
Page fault was a demand zero fault.
ERROR_PAGE_FAULT_PAGING_FILE
751 (0x2EF)
Page fault was satisfied by reading from a secondary storage device.
ERROR_CACHE_PAGE_LOCKED
752 (0x2F0)
Cached page was locked during operation.
ERROR_CRASH_DUMP
753 (0x2F1)
Crash dump exists in paging file.
ERROR_BUFFER_ALL_ZEROS
754 (0x2F2)
Specified buffer contains all zeros.
ERROR_REPARSE_OBJECT
755 (0x2F3)
A reparse should be performed by the Object Manager since the name of the file resulted in a symbolic link.
ERROR_RESOURCE_REQUIREMENTS_CHANGED
756 (0x2F4)
The device has succeeded a query-stop and its resource requirements have changed.
ERROR_TRANSLATION_COMPLETE
757 (0x2F5)
The translator has translated these resources into the global space and no further translations should be performed.
ERROR_NOTHING_TO_TERMINATE
758 (0x2F6)
A process being terminated has no threads to terminate.
ERROR_PROCESS_NOT_IN_JOB
759 (0x2F7)
The specified process is not part of a job.
ERROR_PROCESS_IN_JOB
760 (0x2F8)
The specified process is part of a job.
ERROR_VOLSNAP_HIBERNATE_READY
761 (0x2F9)
{Volume Shadow Copy Service} The system is now ready for hibernation.
ERROR_FSFILTER_OP_COMPLETED_SUCCESSFULLY
762 (0x2FA)
A file system or file system filter driver has successfully completed an FsFilter operation.
ERROR_INTERRUPT_VECTOR_ALREADY_CONNECTED
763 (0x2FB)
The specified interrupt vector was already connected.
ERROR_INTERRUPT_STILL_CONNECTED
764 (0x2FC)
The specified interrupt vector is still connected.
ERROR_WAIT_FOR_OPLOCK
765 (0x2FD)
An operation is blocked waiting for an oplock.
ERROR_DBG_EXCEPTION_HANDLED
766 (0x2FE)
Debugger handled exception
ERROR_DBG_CONTINUE
767 (0x2FF)
Debugger continued
ERROR_CALLBACK_POP_STACK
768 (0×300)
An exception occurred in a user mode callback and the kernel callback frame should be removed.
ERROR_COMPRESSION_DISABLED
769 (0×301)
Compression is disabled for this volume.
ERROR_CANTFETCHBACKWARDS
770 (0×302)
The data provider cannot fetch backwards through a result set.
ERROR_CANTSCROLLBACKWARDS
771 (0×303)
The data provider cannot scroll backwards through a result set.
ERROR_ROWSNOTRELEASED
772 (0×304)
The data provider requires that previously fetched data is released before asking for more data.
ERROR_BAD_ACCESSOR_FLAGS
773 (0×305)
The data provider was not able to interpret the flags set for a column binding in an accessor.
ERROR_ERRORS_ENCOUNTERED
774 (0×306)
One or more errors occurred while processing the request.
ERROR_NOT_CAPABLE
775 (0×307)
The implementation is not capable of performing the request.
ERROR_REQUEST_OUT_OF_SEQUENCE
776 (0×308)
The client of a component requested an operation which is not valid given the state of the component instance.
ERROR_VERSION_PARSE_ERROR
777 (0×309)
A version number could not be parsed.
ERROR_BADSTARTPOSITION
778 (0x30A)
The iterator’s start position is invalid.
ERROR_MEMORY_HARDWARE
779 (0x30B)
The hardware has reported an uncorrectable memory error.
ERROR_DISK_REPAIR_DISABLED
780 (0x30C)
The attempted operation required self healing to be enabled.
ERROR_INSUFFICIENT_RESOURCE_FOR_SPECIFIED_SHARED_SECTION_SIZE
781 (0x30D)
The Desktop heap encountered an error while allocating session memory. There is more information in the system event log.
ERROR_SYSTEM_POWERSTATE_TRANSITION
782 (0x30E)
The system power state is transitioning from %2 to %3.
ERROR_SYSTEM_POWERSTATE_COMPLEX_TRANSITION
783 (0x30F)
The system power state is transitioning from %2 to %3 but could enter %4.
ERROR_MCA_EXCEPTION
784 (0×310)
A thread is getting dispatched with MCA EXCEPTION because of MCA.
ERROR_ACCESS_AUDIT_BY_POLICY
785 (0×311)
Access to %1 is monitored by policy rule %2.
ERROR_ACCESS_DISABLED_NO_SAFER_UI_BY_POLICY
786 (0×312)
Access to %1 has been restricted by your Administrator by policy rule %2.
ERROR_ABANDON_HIBERFILE
787 (0×313)
A valid hibernation file has been invalidated and should be abandoned.
ERROR_LOST_WRITEBEHIND_DATA_NETWORK_DISCONNECTED
788 (0×314)
{Delayed Write Failed} Windows was unable to save all the data for the file %hs; the data has been lost. This error may be caused by network connectivity issues. Please try to save this file elsewhere.
ERROR_LOST_WRITEBEHIND_DATA_NETWORK_SERVER_ERROR
789 (0×315)
{Delayed Write Failed} Windows was unable to save all the data for the file %hs; the data has been lost. This error was returned by the server on which the file exists. Please try to save this file elsewhere.
ERROR_LOST_WRITEBEHIND_DATA_LOCAL_DISK_ERROR
790 (0×316)
{Delayed Write Failed} Windows was unable to save all the data for the file %hs; the data has been lost. This error may be caused if the device has been removed or the media is write-protected.
ERROR_BAD_MCFG_TABLE
791 (0×317)
The resources required for this device conflict with the MCFG table.
ERROR_OPLOCK_SWITCHED_TO_NEW_HANDLE
800 (0×320)
The oplock that was associated with this handle is now associated with a different handle.
ERROR_CANNOT_GRANT_REQUESTED_OPLOCK
801 (0×321)
An oplock of the requested level cannot be granted. An oplock of a lower level may be available.
ERROR_CANNOT_BREAK_OPLOCK
802 (0×322)
The operation did not complete successfully because it would cause an oplock to be broken. The caller has requested that existing oplocks not be broken.
ERROR_OPLOCK_HANDLE_CLOSED
803 (0×323)
The handle with which this oplock was associated has been closed. The oplock is now broken.
ERROR_NO_ACE_CONDITION
804 (0×324)
The specified access control entry (ACE) does not contain a condition.
ERROR_INVALID_ACE_CONDITION
805 (0×325)
The specified access control entry (ACE) contains an invalid condition.
ERROR_EA_ACCESS_DENIED
994 (0x3E2)
Access to the extended attribute was denied.
ERROR_OPERATION_ABORTED
995 (0x3E3)
The I/O operation has been aborted because of either a thread exit or an application request.
ERROR_IO_INCOMPLETE
996 (0x3E4)
Overlapped I/O event is not in a signaled state.
ERROR_IO_PENDING
997 (0x3E5)
Overlapped I/O operation is in progress.
ERROR_NOACCESS
998 (0x3E6)
Invalid access to memory location.
ERROR_SWAPERROR
999 (0x3E7)
Error performing inpage operation.
Constant/value Description
ERROR_SUCCESS
0 (0×0)
The operation completed successfully.
ERROR_INVALID_FUNCTION
1 (0×1)
Incorrect function.
ERROR_FILE_NOT_FOUND
2 (0×2)
The system cannot find the file specified.
ERROR_PATH_NOT_FOUND
3 (0×3)
The system cannot find the path specified.
ERROR_TOO_MANY_OPEN_FILES
4 (0×4)
The system cannot open the file.
ERROR_ACCESS_DENIED
5 (0×5)
Access is denied.
ERROR_INVALID_HANDLE
6 (0×6)
The handle is invalid.
ERROR_ARENA_TRASHED
7 (0×7)
The storage control blocks were destroyed.
ERROR_NOT_ENOUGH_MEMORY
8 (0×8)
Not enough storage is available to process this command.
ERROR_INVALID_BLOCK
9 (0×9)
The storage control block address is invalid.
ERROR_BAD_ENVIRONMENT
10 (0xA)
The environment is incorrect.
ERROR_BAD_FORMAT
11 (0xB)
An attempt was made to load a program with an incorrect format.
ERROR_INVALID_ACCESS
12 (0xC)
The access code is invalid.
ERROR_INVALID_DATA
13 (0xD)
The data is invalid.
ERROR_OUTOFMEMORY
14 (0xE)
Not enough storage is available to complete this operation.
ERROR_INVALID_DRIVE
15 (0xF)
The system cannot find the drive specified.
ERROR_CURRENT_DIRECTORY
16 (0×10)
The directory cannot be removed.
ERROR_NOT_SAME_DEVICE
17 (0×11)
The system cannot move the file to a different disk drive.
ERROR_NO_MORE_FILES
18 (0×12)
There are no more files.
ERROR_WRITE_PROTECT
19 (0×13)
The media is write protected.
ERROR_BAD_UNIT
20 (0×14)
The system cannot find the device specified.
ERROR_NOT_READY
21 (0×15)
The device is not ready.
ERROR_BAD_COMMAND
22 (0×16)
The device does not recognize the command.
ERROR_CRC
23 (0×17)
Data error (cyclic redundancy check).
ERROR_BAD_LENGTH
24 (0×18)
The program issued a command but the command length is incorrect.
ERROR_SEEK
25 (0×19)
The drive cannot locate a specific area or track on the disk.
ERROR_NOT_DOS_DISK
26 (0x1A)
The specified disk or diskette cannot be accessed.
ERROR_SECTOR_NOT_FOUND
27 (0x1B)
The drive cannot find the sector requested.
ERROR_OUT_OF_PAPER
28 (0x1C)
The printer is out of paper.
ERROR_WRITE_FAULT
29 (0x1D)
The system cannot write to the specified device.
ERROR_READ_FAULT
30 (0x1E)
The system cannot read from the specified device.
ERROR_GEN_FAILURE
31 (0x1F)
A device attached to the system is not functioning.
ERROR_SHARING_VIOLATION
32 (0×20)
The process cannot access the file because it is being used by another process.
ERROR_LOCK_VIOLATION
33 (0×21)
The process cannot access the file because another process has locked a portion of the file.
ERROR_WRONG_DISK
34 (0×22)
The wrong diskette is in the drive. Insert %2 (Volume Serial Number: %3) into drive %1.
ERROR_SHARING_BUFFER_EXCEEDED
36 (0×24)
Too many files opened for sharing.
ERROR_HANDLE_EOF
38 (0×26)
Reached the end of the file.
ERROR_HANDLE_DISK_FULL
39 (0×27)
The disk is full.
ERROR_NOT_SUPPORTED
50 (0×32)
The request is not supported.
ERROR_REM_NOT_LIST
51 (0×33)
Windows cannot find the network path. Verify that the network path is correct and the destination computer is not busy or turned off. If Windows still cannot find the network path, contact your network administrator.
ERROR_DUP_NAME
52 (0×34)
You were not connected because a duplicate name exists on the network. If joining a domain, go to System in Control Panel to change the computer name and try again. If joining a workgroup, choose another workgroup name.
ERROR_BAD_NETPATH
53 (0×35)
The network path was not found.
ERROR_NETWORK_BUSY
54 (0×36)
The network is busy.
ERROR_DEV_NOT_EXIST
55 (0×37)
The specified network resource or device is no longer available.
ERROR_TOO_MANY_CMDS
56 (0×38)
The network BIOS command limit has been reached.
ERROR_ADAP_HDW_ERR
57 (0×39)
A network adapter hardware error occurred.
ERROR_BAD_NET_RESP
58 (0x3A)
The specified server cannot perform the requested operation.
ERROR_UNEXP_NET_ERR
59 (0x3B)
An unexpected network error occurred.
ERROR_BAD_REM_ADAP
60 (0x3C)
The remote adapter is not compatible.
ERROR_PRINTQ_FULL
61 (0x3D)
The printer queue is full.
ERROR_NO_SPOOL_SPACE
62 (0x3E)
Space to store the file waiting to be printed is not available on the server.
ERROR_PRINT_CANCELLED
63 (0x3F)
Your file waiting to be printed was deleted.
ERROR_NETNAME_DELETED
64 (0×40)
The specified network name is no longer available.
ERROR_NETWORK_ACCESS_DENIED
65 (0×41)
Network access is denied.
ERROR_BAD_DEV_TYPE
66 (0×42)
The network resource type is not correct.
ERROR_BAD_NET_NAME
67 (0×43)
The network name cannot be found.
ERROR_TOO_MANY_NAMES
68 (0×44)
The name limit for the local computer network adapter card was exceeded.
ERROR_TOO_MANY_SESS
69 (0×45)
The network BIOS session limit was exceeded.
ERROR_SHARING_PAUSED
70 (0×46)
The remote server has been paused or is in the process of being started.
ERROR_REQ_NOT_ACCEP
71 (0×47)
No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept.
ERROR_REDIR_PAUSED
72 (0×48)
The specified printer or disk device has been paused.
ERROR_FILE_EXISTS
80 (0×50)
The file exists.
ERROR_CANNOT_MAKE
82 (0×52)
The directory or file cannot be created.
ERROR_FAIL_I24
83 (0×53)
Fail on INT 24.
ERROR_OUT_OF_STRUCTURES
84 (0×54)
Storage to process this request is not available.
ERROR_ALREADY_ASSIGNED
85 (0×55)
The local device name is already in use.
ERROR_INVALID_PASSWORD
86 (0×56)
The specified network password is not correct.
ERROR_INVALID_PARAMETER
87 (0×57)
The parameter is incorrect.
ERROR_NET_WRITE_FAULT
88 (0×58)
A write fault occurred on the network.
ERROR_NO_PROC_SLOTS
89 (0×59)
The system cannot start another process at this time.
ERROR_TOO_MANY_SEMAPHORES
100 (0×64)
Cannot create another system semaphore.
ERROR_EXCL_SEM_ALREADY_OWNED
101 (0×65)
The exclusive semaphore is owned by another process.
ERROR_SEM_IS_SET
102 (0×66)
The semaphore is set and cannot be closed.
ERROR_TOO_MANY_SEM_REQUESTS
103 (0×67)
The semaphore cannot be set again.
ERROR_INVALID_AT_INTERRUPT_TIME
104 (0×68)
Cannot request exclusive semaphores at interrupt time.
ERROR_SEM_OWNER_DIED
105 (0×69)
The previous ownership of this semaphore has ended.
ERROR_SEM_USER_LIMIT
106 (0x6A)
Insert the diskette for drive %1.
ERROR_DISK_CHANGE
107 (0x6B)
The program stopped because an alternate diskette was not inserted.
ERROR_DRIVE_LOCKED
108 (0x6C)
The disk is in use or locked by another process.
ERROR_BROKEN_PIPE
109 (0x6D)
The pipe has been ended.
ERROR_OPEN_FAILED
110 (0x6E)
The system cannot open the device or file specified.
ERROR_BUFFER_OVERFLOW
111 (0x6F)
The file name is too long.
ERROR_DISK_FULL
112 (0×70)
There is not enough space on the disk.
ERROR_NO_MORE_SEARCH_HANDLES
113 (0×71)
No more internal file identifiers available.
ERROR_INVALID_TARGET_HANDLE
114 (0×72)
The target internal file identifier is incorrect.
ERROR_INVALID_CATEGORY
117 (0×75)
The IOCTL call made by the application program is not correct.
ERROR_INVALID_VERIFY_SWITCH
118 (0×76)
The verify-on-write switch parameter value is not correct.
ERROR_BAD_DRIVER_LEVEL
119 (0×77)
The system does not support the command requested.
ERROR_CALL_NOT_IMPLEMENTED
120 (0×78)
This function is not supported on this system.
ERROR_SEM_TIMEOUT
121 (0×79)
The semaphore timeout period has expired.
ERROR_INSUFFICIENT_BUFFER
122 (0x7A)
The data area passed to a system call is too small.
ERROR_INVALID_NAME
123 (0x7B)
The filename, directory name, or volume label syntax is incorrect.
ERROR_INVALID_LEVEL
124 (0x7C)
The system call level is not correct.
ERROR_NO_VOLUME_LABEL
125 (0x7D)
The disk has no volume label.
ERROR_MOD_NOT_FOUND
126 (0x7E)
The specified module could not be found.
ERROR_PROC_NOT_FOUND
127 (0x7F)
The specified procedure could not be found.
ERROR_WAIT_NO_CHILDREN
128 (0×80)
There are no child processes to wait for.
ERROR_CHILD_NOT_COMPLETE
129 (0×81)
The %1 application cannot be run in Win32 mode.
ERROR_DIRECT_ACCESS_HANDLE
130 (0×82)
Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O.
ERROR_NEGATIVE_SEEK
131 (0×83)
An attempt was made to move the file pointer before the beginning of the file.
ERROR_SEEK_ON_DEVICE
132 (0×84)
The file pointer cannot be set on the specified device or file.
ERROR_IS_JOIN_TARGET
133 (0×85)
A JOIN or SUBST command cannot be used for a drive that contains previously joined drives.
ERROR_IS_JOINED
134 (0×86)
An attempt was made to use a JOIN or SUBST command on a drive that has already been joined.
ERROR_IS_SUBSTED
135 (0×87)
An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted.
ERROR_NOT_JOINED
136 (0×88)
The system tried to delete the JOIN of a drive that is not joined.
ERROR_NOT_SUBSTED
137 (0×89)
The system tried to delete the substitution of a drive that is not substituted.
ERROR_JOIN_TO_JOIN
138 (0x8A)
The system tried to join a drive to a directory on a joined drive.
ERROR_SUBST_TO_SUBST
139 (0x8B)
The system tried to substitute a drive to a directory on a substituted drive.
ERROR_JOIN_TO_SUBST
140 (0x8C)
The system tried to join a drive to a directory on a substituted drive.
ERROR_SUBST_TO_JOIN
141 (0x8D)
The system tried to SUBST a drive to a directory on a joined drive.
ERROR_BUSY_DRIVE
142 (0x8E)
The system cannot perform a JOIN or SUBST at this time.
ERROR_SAME_DRIVE
143 (0x8F)
The system cannot join or substitute a drive to or for a directory on the same drive.
ERROR_DIR_NOT_ROOT
144 (0×90)
The directory is not a subdirectory of the root directory.
ERROR_DIR_NOT_EMPTY
145 (0×91)
The directory is not empty.
ERROR_IS_SUBST_PATH
146 (0×92)
The path specified is being used in a substitute.
ERROR_IS_JOIN_PATH
147 (0×93)
Not enough resources are available to process this command.
ERROR_PATH_BUSY
148 (0×94)
The path specified cannot be used at this time.
ERROR_IS_SUBST_TARGET
149 (0×95)
An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute.
ERROR_SYSTEM_TRACE
150 (0×96)
System trace information was not specified in your CONFIG.SYS file, or tracing is disallowed.
ERROR_INVALID_EVENT_COUNT
151 (0×97)
The number of specified semaphore events for DosMuxSemWait is not correct.
ERROR_TOO_MANY_MUXWAITERS
152 (0×98)
DosMuxSemWait did not execute; too many semaphores are already set.
ERROR_INVALID_LIST_FORMAT
153 (0×99)
The DosMuxSemWait list is not correct.
ERROR_LABEL_TOO_LONG
154 (0x9A)
The volume label you entered exceeds the label character limit of the target file system.
ERROR_TOO_MANY_TCBS
155 (0x9B)
Cannot create another thread.
ERROR_SIGNAL_REFUSED
156 (0x9C)
The recipient process has refused the signal.
ERROR_DISCARDED
157 (0x9D)
The segment is already discarded and cannot be locked.
ERROR_NOT_LOCKED
158 (0x9E)
The segment is already unlocked.
ERROR_BAD_THREADID_ADDR
159 (0x9F)
The address for the thread ID is not correct.
ERROR_BAD_ARGUMENTS
160 (0xA0)
One or more arguments are not correct.
ERROR_BAD_PATHNAME
161 (0xA1)
The specified path is invalid.
ERROR_SIGNAL_PENDING
162 (0xA2)
A signal is already pending.
ERROR_MAX_THRDS_REACHED
164 (0xA4)
No more threads can be created in the system.
ERROR_LOCK_FAILED
167 (0xA7)
Unable to lock a region of a file.
ERROR_BUSY
170 (0xAA)
The requested resource is in use.
ERROR_CANCEL_VIOLATION
173 (0xAD)
A lock request was not outstanding for the supplied cancel region.
ERROR_ATOMIC_LOCKS_NOT_SUPPORTED
174 (0xAE)
The file system does not support atomic changes to the lock type.
ERROR_INVALID_SEGMENT_NUMBER
180 (0xB4)
The system detected a segment number that was not correct.
ERROR_INVALID_ORDINAL
182 (0xB6)
The operating system cannot run %1.
ERROR_ALREADY_EXISTS
183 (0xB7)
Cannot create a file when that file already exists.
ERROR_INVALID_FLAG_NUMBER
186 (0xBA)
The flag passed is not correct.
ERROR_SEM_NOT_FOUND
187 (0xBB)
The specified system semaphore name was not found.
ERROR_INVALID_STARTING_CODESEG
188 (0xBC)
The operating system cannot run %1.
ERROR_INVALID_STACKSEG
189 (0xBD)
The operating system cannot run %1.
ERROR_INVALID_MODULETYPE
190 (0xBE)
The operating system cannot run %1.
ERROR_INVALID_EXE_SIGNATURE
191 (0xBF)
Cannot run %1 in Win32 mode.
ERROR_EXE_MARKED_INVALID
192 (0xC0)
The operating system cannot run %1.
ERROR_BAD_EXE_FORMAT
193 (0xC1)
%1 is not a valid Win32 application.
ERROR_ITERATED_DATA_EXCEEDS_64k
194 (0xC2)
The operating system cannot run %1.
ERROR_INVALID_MINALLOCSIZE
195 (0xC3)
The operating system cannot run %1.
ERROR_DYNLINK_FROM_INVALID_RING
196 (0xC4)
The operating system cannot run this application program.
ERROR_IOPL_NOT_ENABLED
197 (0xC5)
The operating system is not presently configured to run this application.
ERROR_INVALID_SEGDPL
198 (0xC6)
The operating system cannot run %1.
ERROR_AUTODATASEG_EXCEEDS_64k
199 (0xC7)
The operating system cannot run this application program.
ERROR_RING2SEG_MUST_BE_MOVABLE
200 (0xC8)
The code segment cannot be greater than or equal to 64K.
ERROR_RELOC_CHAIN_XEEDS_SEGLIM
201 (0xC9)
The operating system cannot run %1.
ERROR_INFLOOP_IN_RELOC_CHAIN
202 (0xCA)
The operating system cannot run %1.
ERROR_ENVVAR_NOT_FOUND
203 (0xCB)
The system could not find the environment option that was entered.
ERROR_NO_SIGNAL_SENT
205 (0xCD)
No process in the command subtree has a signal handler.
ERROR_FILENAME_EXCED_RANGE
206 (0xCE)
The filename or extension is too long.
ERROR_RING2_STACK_IN_USE
207 (0xCF)
The ring 2 stack is in use.
ERROR_META_EXPANSION_TOO_LONG
208 (0xD0)
The global filename characters, * or ?, are entered incorrectly or too many global filename characters are specified.
ERROR_INVALID_SIGNAL_NUMBER
209 (0xD1)
The signal being posted is not correct.
ERROR_THREAD_1_INACTIVE
210 (0xD2)
The signal handler cannot be set.
ERROR_LOCKED
212 (0xD4)
The segment is locked and cannot be reallocated.
ERROR_TOO_MANY_MODULES
214 (0xD6)
Too many dynamic-link modules are attached to this program or dynamic-link module.
ERROR_NESTING_NOT_ALLOWED
215 (0xD7)
Cannot nest calls to LoadModule.
ERROR_EXE_MACHINE_TYPE_MISMATCH
216 (0xD8)
The version of %1 is not compatible with the version you’re running. Check your computer’s system information to see whether you need a x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher.
ERROR_EXE_CANNOT_MODIFY_SIGNED_BINARY
217 (0xD9)
The image file %1 is signed, unable to modify.
ERROR_EXE_CANNOT_MODIFY_STRONG_SIGNED_BINARY
218 (0xDA)
The image file %1 is strong signed, unable to modify.
ERROR_FILE_CHECKED_OUT
220 (0xDC)
This file is checked out or locked for editing by another user.
ERROR_CHECKOUT_REQUIRED
221 (0xDD)
The file must be checked out before saving changes.
ERROR_BAD_FILE_TYPE
222 (0xDE)
The file type being saved or retrieved has been blocked.
ERROR_FILE_TOO_LARGE
223 (0xDF)
The file size exceeds the limit allowed and cannot be saved.
ERROR_FORMS_AUTH_REQUIRED
224 (0xE0)
Access Denied. Before opening files in this location, you must first add the web site to your trusted sites list, browse to the web site, and select the option to login automatically.
ERROR_VIRUS_INFECTED
225 (0xE1)
Operation did not complete successfully because the file contains a virus.
ERROR_VIRUS_DELETED
226 (0xE2)
This file contains a virus and cannot be opened. Due to the nature of this virus, the file has been removed from this location.
ERROR_PIPE_LOCAL
229 (0xE5)
The pipe is local.
ERROR_BAD_PIPE
230 (0xE6)
The pipe state is invalid.
ERROR_PIPE_BUSY
231 (0xE7)
All pipe instances are busy.
ERROR_NO_DATA
232 (0xE8)
The pipe is being closed.
ERROR_PIPE_NOT_CONNECTED
233 (0xE9)
No process is on the other end of the pipe.
ERROR_MORE_DATA
234 (0xEA)
More data is available.
ERROR_VC_DISCONNECTED
240 (0xF0)
The session was canceled.
ERROR_INVALID_EA_NAME
254 (0xFE)
The specified extended attribute name was invalid.
ERROR_EA_LIST_INCONSISTENT
255 (0xFF)
The extended attributes are inconsistent.
WAIT_TIMEOUT
258 (0×102)
The wait operation timed out.
ERROR_NO_MORE_ITEMS
259 (0×103)
No more data is available.
ERROR_CANNOT_COPY
266 (0x10A)
The copy functions cannot be used.
ERROR_DIRECTORY
267 (0x10B)
The directory name is invalid.
ERROR_EAS_DIDNT_FIT
275 (0×113)
The extended attributes did not fit in the buffer.
ERROR_EA_FILE_CORRUPT
276 (0×114)
The extended attribute file on the mounted file system is corrupt.
ERROR_EA_TABLE_FULL
277 (0×115)
The extended attribute table file is full.
ERROR_INVALID_EA_HANDLE
278 (0×116)
The specified extended attribute handle is invalid.
ERROR_EAS_NOT_SUPPORTED
282 (0x11A)
The mounted file system does not support extended attributes.
ERROR_NOT_OWNER
288 (0×120)
Attempt to release mutex not owned by caller.
ERROR_TOO_MANY_POSTS
298 (0x12A)
Too many posts were made to a semaphore.
ERROR_PARTIAL_COPY
299 (0x12B)
Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
ERROR_OPLOCK_NOT_GRANTED
300 (0x12C)
The oplock request is denied.
ERROR_INVALID_OPLOCK_PROTOCOL
301 (0x12D)
An invalid oplock acknowledgment was received by the system.
ERROR_DISK_TOO_FRAGMENTED
302 (0x12E)
The volume is too fragmented to complete this operation.
ERROR_DELETE_PENDING
303 (0x12F)
The file cannot be opened because it is in the process of being deleted.
ERROR_INCOMPATIBLE_WITH_GLOBAL_SHORT_NAME_REGISTRY_SETTING
304 (0×130)
Short name settings may not be changed on this volume due to the global registry setting.
ERROR_SHORT_NAMES_NOT_ENABLED_ON_VOLUME
305 (0×131)
Short names are not enabled on this volume.
ERROR_SECURITY_STREAM_IS_INCONSISTENT
306 (0×132)
The security stream for the given volume is in an inconsistent state. Please run CHKDSK on the volume.
ERROR_INVALID_LOCK_RANGE
307 (0×133)
A requested file lock operation cannot be processed due to an invalid byte range.
ERROR_IMAGE_SUBSYSTEM_NOT_PRESENT
308 (0×134)
The subsystem needed to support the image type is not present.
ERROR_NOTIFICATION_GUID_ALREADY_DEFINED
309 (0×135)
The specified file already has a notification GUID associated with it.
ERROR_MR_MID_NOT_FOUND
317 (0x13D)
The system cannot find message text for message number 0x%1 in the message file for %2.
ERROR_SCOPE_NOT_FOUND
318 (0x13E)
The scope specified was not found.
ERROR_FAIL_NOACTION_REBOOT
350 (0x15E)
No action was taken as a system reboot is required.
ERROR_FAIL_SHUTDOWN
351 (0x15F)
The shutdown operation failed.
ERROR_FAIL_RESTART
352 (0×160)
The restart operation failed.
ERROR_MAX_SESSIONS_REACHED
353 (0×161)
The maximum number of sessions has been reached.
ERROR_THREAD_MODE_ALREADY_BACKGROUND
400 (0×190)
The thread is already in background processing mode.
ERROR_THREAD_MODE_NOT_BACKGROUND
401 (0×191)
The thread is not in background processing mode.
ERROR_PROCESS_MODE_ALREADY_BACKGROUND
402 (0×192)
The process is already in background processing mode.
ERROR_PROCESS_MODE_NOT_BACKGROUND
403 (0×193)
The process is not in background processing mode.
ERROR_INVALID_ADDRESS
487 (0x1E7)
Attempt to access invalid address.

Tag Cloud

Follow

Get every new post delivered to your Inbox.